cheekbone – cheek filling

The connective tissue that loosens with the effect of aging and the decreasing subcutaneous adipose tissue cannot resist gravity. The face looks tired and old, the lines are blurred, which creates an undesirable image. Cheekbone filling, which is one of the most preferred techniques in order to regain the fullness lost to the face, is a procedure that gives effective results in the contours of the cheekbones. It is possible to add a young and active expression to the face with the filler injected under the skin with an average of 15 minutes of application. Fullness can be achieved by eliminating the collapsed cheek appearance.

Cheek and cheekbone filling application, Standard aesthetic measurements are available for a young and beautiful appearance on the face. All faces that are generally accepted as beautiful have common features. A triangular face appearance with a prominent cheekbone, prominent jawline reveals an ideal face format. But these norms are not for everyone, depending on aging or personal characteristics. In these areas, especially the cheekbone area and cheeks are very important. Because the volume of the cheekbone area decreases due to aging. Tissue accumulation on the laugh lines increases and the laugh lines deepen. In addition, noticeable dimples occur in the cheek area in thin patients. This appearance makes the person look bigger and paler than they are.

How to make cheekbone filling and cheek filling?

Fat injection can be applied to fill these areas. But the best method without surgery is ready-to-face filling applications. The filling applied to the cheekbone creates a fullness in that area. It also provides a recovery with a lifting effect on the face. The filler applied to the cheeks reduces the skin depressions and wrinkles and provides that area to have a better appearance. In this way, the deteriorated face oval is regained with a triangular appearance.

Filling should be applied especially after a good analysis of the face, although the expectations of the patients are listened to, the areas of the face that need filling should be specified. In fact, the patient’s face must be drawn and it must be determined in advance how much volume will be given to which area.

Cheek fillers are often applied to patients who have a very thin face or have recently lost excessive weight. Cheekbone fillings are applied to patients who do not have sufficient volume in the malar region, either structurally or due to aging. Sometimes these regions are interrelated. Applying to both areas at the same time provides a better facial harmony and softens the malar cheek transition.

The dose to be administered varies according to the desired volume in percent and the resulting volume loss. The application is made into the deep layer or even directly on the bone. Using a cannula is a better option. Generally, 0.5-2 cc filler application for each region in the cheekbone area gives satisfactory results. 0.5-2 cc application in the cheek area is sufficient. The preferred filling is Voluma. It provides a good volumetric gain.

The filling applied to the cheek and cheekbone area should be made in a natural and aesthetic way to restore the lost volume and restore the proportional harmony of the face. Avoiding unnatural and exaggerated practices is very important for the validity of the practice. Because an artificial and exaggerated facial appearance that has lost its naturalness will not be found pleasant by anyone. The purpose of these applications is to contribute to the pleasant appearance of the face with small touches. If the percent volume losses are too high, filling applications should be done gradually or fat injection should be considered.

What is the filler used in cheekbone filling application?

Although the substance that is frequently used in cheekbone filling is hyaluronic acid, which stands out with its rejuvenating and skin-structuring properties, some physicians may prefer to inject some of the fat taken from the patient’s own body by liposuction, depending on the patient’s condition.

How long does the cheekbone filling process take?

If hyaluronic acid is preferred as a filler in cheek fillings, the process takes about 15-20 minutes on average, but if the person’s own fat is to be used, an average of 1 hour should be taken into account, since there will also be a short liposuction procedure beforehand.

While the procedure can be performed in any clinic, beauty center or practice environment with acid filling, if the lipo process is involved, it would be more appropriate to perform it in a hospital where the operating room environment is provided.

Is the cheekbone filling procedure painful?

Thanks to the application of the appropriate anesthetic cream to be used before the cheek filling aesthetics, the procedure area is locally anesthetized, and the needles used for the filling are almost never pierced, and only a short-term and mild discomfort occurs.

Since no side effects such as allergic conditions, pain, edema, swelling and bruising are expected after the procedure, it is usually possible to return to daily life or business life immediately after the procedure, but a waiting period of at least one day is recommended for applying make-up.

Rarely, edema and bruising may occur. In such cases, the appropriate solution is Hirudoid Forte Gel etc. that your doctor will prescribe to you. is the use of an anti-edema cream.

Is cheekbone filling permanent?

No matter what the filler is, cheek filler procedures are not permanent for life. Depending on the skin structure of the person, the filler applied and your life, the duration of the cheekbone filling varies between 9 months and 18 months, but IN GENERAL, your cheeks do not completely return to their original state at the end of the period, 1 – 1.5 years after each application, % of the filling material About 70% is lost, 30% is stored in the body.

After repeating the filling process that you have applied to protrude the cheekbone a few times annually, it will be sufficient to continue to renew it every 2-3 years.

Things to consider when making cheekbone filling;

While filling the cheekbone area, care should be taken to preserve the facial expression of the individual and not to spoil its naturalness. High cheekbones are always more attractive as they add radiance and vitality to the face. The cheekbones, which draw more attention when we smile, bring a more aesthetic air to the face by pulling it up. There may be congenitally flat cheekbones and sunken cheeks due to aging, weakening, gravity or hereditary factors. It is an aesthetic problem that our skin, which looks bright and alive at a young age, loses this feature over time. Aging skin begins to look more tired and worn. This technique, which is applied in our clinic to eliminate aesthetic concerns, is simple and gives successful results. Filling procedure can also be done with our fat injection technique. In this process, fat is taken from the part of the body where excess fat mass is detected, and after special processes, it can be injected into the parts where collapse and wrinkles are detected. A younger and fresher face will be obtained.

What are the prices of cheekbone fillers?

Cheekbone and cheek filler prices, which differ in costs depending on the type of material used during the application, how many cc fillers are used according to the needs of the application area, and the skill and experience of the physician or specialist performing the procedure, are examined in more detail in our related article.

Cheekbone filling application;

In order to create a natural beauty in the facial lines, the application of cheekbone filling gives volume with the developing medical technology. The filler, which is applied around the collapsed cheekbone, will be injected with hyaluronic acid content and will give a healthy and vigorous upper cheek appearance. It is also very easy to apply as a beautifying aesthetic method.

How is cheekbone filling application done?

The filling method, which is applied to the cheekbone area by injection method, is not performed like a surgical operation and takes a short time. By applying local anesthesia, it is ensured that the patient is injected with fine-tipped needles without feeling any pain or pain. The hyaluronic acid filler in the injection is injected directly into the cavities of the cheekbones and is completed in approximately thirty-five to forty-five minutes. Filling the gaps in the cheekbone will eliminate the collapse and lifeless appearance here and will provide a young and vigorous appearance. The application of cheekbone filling also provides a long-term beautiful appearance without allowing wrinkles and sagging.

How effective is the cheekbone filling application?

Depending on the health status of the person applied after the application of cheekbone filling, the permanence rate also differs in this way. Moving the facial muscles too much after filling, use of blood thinners, and history of oyoimmune disease also affect the permanence. Depending on environmental factors, the remaining filling in the face will be at the person’s own initiative, and its duration will increase in this way, directly related to how careful he is. Filling, which offers a long-term use in general, is a powerful method that will affect the point where the cheekbones are located to look young and beautiful, and to remove wrinkles and damage.

Materials used in cheekbone filling;

Hyaluronic acid, which is present in the human body, offers a natural method of use as a moisture agent. While this method is used by injecting directly into the cheekbones, the fat in the patient’s own body can be removed and fillers can be made. For this, the fat in the patient’s hip or abdomen is removed and as a natural method, the healthy development of the region is created on the basis of the person’s own fat value. Stem cells taken from the fat will be multiplied in the laboratory and combined with the patient’s own fat and injected. The application of cheekbone filling can be applied as a natural aesthetic method thanks to advanced medical technology and it affects the patient’s healthy appearance.

Cheekbone filling application time;

Cheekbone filling, which should be applied by professional physicians, takes between 45 minutes and 1 hour. As a treatment method that shows its effect immediately after the procedure, it is necessary to wait for 3 to 4 weeks in order to reproduce the stem cells taken from the patient in the first stage. It is applied in a sterile way to monitor a healthy process. When the effect of the cheekbone filling, which lasts for 2 to 3 years, is over, the patient can have the same procedure done again.

What are the side effects of cheekbone filler?

Since the cheekbone filling application is an application with a needle, the patient may have mild redness after the treatment. Apart from this, there may be rare swelling and bruising, and ice should be applied accordingly. It will be good to rub the area with the cream with light massages, and the patient should not lie face down according to the treatment process and doctor’s advice. By avoiding sports and activities that affect the face, it is also with the patient’s attention to prevent the occurrence of side effects or a bad course of the process.